ABB TPL-C Series Assembly Instructions

Assembly Instructions / TPL67-C ... TPL71-C, TPL67VC
4 Installing the turbocharger / 
© Copyright 2020 ABB. All rights reserved. HZTL455311P0014_EN Rev.A July 2020
4 Installing the turbocharger
The TPL-C turbocharger has a two-part foot, consisting of a foot at the turbine end (TE) and
a foot at the compressor end (CE). The foot at the compressor end (CE) is rigidly attached to
the engine support, whereas the foot at the turbine end (TE) is a sliding foot that is pressed
onto the engine support to compensate for thermal expansion during operation.
u Lift the turbocharger as described in the chapter Weight and Transport, place onto the
bracket and align.
u Secure the turbocharger as described in steps 1-10.
TE Foot on turbine end
CE Foot on compressor end
A Foot contact surface
M Centre axis
Table6
Page 10 / 21

ABB TPL-C Series Specifications

General

Brand	ABB
Model	TPL-C Series
Category	Industrial Equipment
Language	English