Important!
31
30
4.2Setting the year
MEMO button
SET button
1. Check that the meter is off and press the
SET button. The meter turns on without
advancing a test strip from the drum.
2. Press the SET button repeatedly until the
current year setting flashes at top right of
the display.
3. Press the MEMO button to adjust the year.
The meter scrolls upwards through the year val-
ues. If you hold the MEMO button down,
the meter fast-scrolls forward to 2032 and then
begins again at 2000.
ON/OFF button
4. If you wish to define the date and time
format, leave the meter turned on and
proceed to step 2 in the next section.
The year is not displayed during testing or
review of blood glucose test results. It is
still important, however, as February 29 in
a leap year will only be recognized when the
year is properly set. The current year setting
is also needed to correctly identify your blood
glucose test results if you transfer them
from your meter’s memory to a computer.
To Next Page
Loading...
Need help?
General
