Chapter 1: Your New Meter
Chapter 4: Using Your Meter’s Memo
View
Example
Example
With the
sugar re
Example
30
Viewing Test Results
1. With the meter off, press MEM.
The meter turns on without advancing a test strip. ON and 888 appear briefly.
Then, the most recent result, along with the date, time (if set), and the word
MEMO will be displayed.
2. Press SET to view your results from newest to oldest, one at a time.
3. Press MEM to move back toward newer results.
You can hold down the SET or MEM buttons to scroll through your results
more quickly.
4. Press to turn off the meter.
Example
Chapter 4: Using Your Meter’s Memory
Storing Test Results
Your meter automatically stores up to 100 test results, and you can review them
at any time.
If you’ve set the time and date on the meter (see
Setting the Beeper, Year, Time,
and Date
), this information is stored and displayed with your test results. If you
haven’t, test results are simply stored in order, from the newest to the oldest.
Gradient bar at
top prints 65c,
100m, 15k to
white.
“
Storing Test
Results
”, and
“
Viewing Test
Results
” print
65c, 100m,
15k.
361_26758_Manual_AC_Compact.qxp 6/27/05 11:35 AM Page 30
To Next Page
Loading...
Need help?
General
