If you have turned on the alarm clock function, a reminder beeper will sound at the set times with tones at 1-
second intervals for 20 seconds. You can turn off the alarm within these 20 seconds by pressing either button.
NOTE: If the meter is already turned on at one of the set alarm times, the alarm will not sound.
NOTE: If you turn off the alarm clock function after setting the alarm time(s), they will remain stored in memory.
Once you have set the alarm time(s), press to confirm and move on to “Setting the Beep Tone.”
Setting the Beep Tone
Once you have confirmed the alarm settings, you have the option of turning the beep tone on or off. The beep
tone sounds, for instance, after blood has been applied at the start of testing, and when a result is displayed.
1. Press to set the beep to "On" or "Off."
2. Press to confirm your choice.
NOTE: The beep tone, as mentioned in this manual, will
only sound if it has been turned "On" as described above.
To Next Page
Loading...
Need help?
General
