English
16
Changing channels
1 Press 0-9 on the remote control to select a
channel. The channel changes after 2 seconds.
Press ENTER to select the channel immediately.
2 You can also change the channel by pressing
and holding the channel up/down button on
the remote control. Up will increase the num-
ber, while down will decrease the number.
Adjusting the volume
Adjust the volume by pressing using the Vol +/-
button on the remote control. Up will increase the
volume, while down will decrease the volume.
You can also adjust the volume and chan-
nel using the buttons on the front control
panel. Please see “Front panel view” on
page 8 for details.
Getting started watching your TV
Power On
a. Press the power switch located on the bottom
of the TV to the “on” position
b. Push the power button, number keys, or chan-
nel up/down button on the remote control.
Setup Wizard
The first time you switch on the TV, the Setup
wizard will guide you to complete the “language
selection” and “channel scanning”.
Step 1. Please select language:
Step 2. Please plug in the tuner coaxial cable and
then press "OK" key
Step 3. Please select TV system (air or cable)
Step 4. Auto scanning, please wait.
Setup completed
To Next Page
Loading...
Need help?
Display
Power
Ports & Interfaces
Audio System
Weight and Dimensions
