EasyManuals Logo

Acer Aspire M5810 User Manual

Acer Aspire M5810
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
47 Chapter 4
Storage Device
B: Drive Error The BIOS attempted to configure the B: drive during POST, but was unable to properly
configure the device. This may be due to a bad cable or faulty diskette drive.
Insert BOOT
diskette in A:
The BIOS attempted to boot from the A: drive, but could not find a proper boot diskette.
Reboot and
Select proper
Boot device or
Insert Boot
Media in
selected Boot
device
BIOS could not find a bootable device in the system and/or removable media drive does
not contain media.
NO ROM
BASIC
This message occurs on some systems when no bootable device can be detected.
Message
Displayed
Description
Primary
Master Hard
Disk Error
The IDE/ATAPI device configured as Primary Master could not be properly initialized by the
BIOS. This message is typically displayed when the BIOS is trying to detect and configure
IDE/ATAPI devices in POST.
Primary Slave
Hard Disk
Error
The IDE/ATAPI device configured as Primary Slave could not be properly initialized by the
BIOS. This message is typically displayed when the BIOS is trying to detect and configure
IDE/ATAPI devices in POST.
Secondary
Master Hard
Disk Error
The IDE/ATAPI device configured as Secondary Master could not be properly initialized by
the BIOS. This message is typically displayed when the BIOS is trying to detect and
configure IDE/ATAPI devices in POST.
Secondary
Slave Hard
Disk Error
The IDE/ATAPI device configured as Secondary Slave could not be properly initialized by
the BIOS. This message is typically displayed when the BIOS is trying to detect and
configure IDE/ATAPI devices in POST.
3rd Master
Hard Disk
Error
The IDE/ATAPI device configured as Master in the 3rd IDE controller could not be properly
initialized by the BIOS. This message is typically displayed when the BIOS is trying to
detect and configure IDE/ATAPI devices in POST.
3rd Slave Hard
Disk Error
The IDE/ATAPI device configured as Slave in the 3rd IDE controller could not be properly
initialized by the BIOS. This message is typically displayed when the BIOS is trying to
detect and configure IDE/ATAPI devices in POST.
4th Master
Hard Disk
Error
The IDE/ATAPI device configured as Master in the 4th IDE controller could not be properly
initialized by the BIOS. This message is typically displayed when the BIOS is trying to
detect and configure IDE/ATAPI devices in POST.
4th Slave Hard
Disk Error
The IDE/ATAPI device configured as Slave in the 4th IDE controller could not be properly
initialized by the BIOS. This message is typically displayed when the BIOS is trying to
detect and configure IDE/ATAPI devices in POST.
5th Master
Hard Disk
Error
The IDE/ATAPI device configured as Master in the 5th IDE controller could not be properly
initialized by the BIOS. This message is typically displayed when the BIOS is trying to
detect and configure IDE/ATAPI devices in POST.
Message
Displayed
Description

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Acer Aspire M5810 and is the answer not in the manual?

Acer Aspire M5810 Specifications

General IconGeneral
Tcase72.7 °C
Bus typeDMI
SteppingB1
Processor cache8 MB
System bus rate2.5 GT/s
Processor familyIntel® Core™ i5
Processor seriesIntel Core i5-700 Desktop Series
Processor socketLGA 1156 (Socket H)
Processor threads4
Processor codenameLynnfield
Processing Die size296 mm²
Processor frequency2.66 GHz
Processor cache typeSmart Cache
Processor lithography45 nm
Processor manufacturerIntel
Processor front side bus1333 MHz
PCI Express slots version2.0
Processor boost frequency3.2 GHz
Processor operating modes64-bit
ECC supported by processorNo
PCI Express configurations1x16, 2x8
Thermal Design Power (TDP)95 W
CPU multiplier (bus/core ratio)20
Maximum number of PCI Express lanes16
Memory types supported by processorDDR3-SDRAM
Number of Processing Die Transistors774 M
Memory clock speeds supported by processor1066, 1333 MHz
Memory bandwidth supported by processor (max)21 GB/s
Maximum internal memory supported by processor16 GB
Internal memory6 GB
Memory channelsDual-channel
Maximum internal memory8 GB
HDD interfaceSATA
Optical drive typeDVD±RW
Card reader integratedYes
Total storage capacity1000 GB
Compatible memory cardsminiSD, MMC, MS Duo, MS Micro (M2), MS PRO, MS PRO Duo, MS PRO-HG Duo, SD, xD
Networking featuresGigabit Ethernet
Discrete graphics card modelNVIDIA® GeForce® GT 220
Maximum graphics card memory2.431 GB
Discrete graphics card memory1024 GB
Audio systemHigh Definition Audio
Product typePC
Bundled softwareAcer eRecovery Management, Acer Arcade Deluxe, eSobi, Adobe Reader, MyWinLocker, Nero 9 Essentials, Oberon GameZone
Operating system installedWindows 7 Home Premium
PS/2 ports quantity2
Serial ports quantity0
USB 2.0 ports quantity10
Firewire (IEEE 1394) ports1
Power supply500 W
Chassis typeTower
Processor ARK ID42915
Processor package size37.5 x 37.5 mm
Supported instruction setsSSE4.2
Intel® Turbo Boost Technology1.0
Physical Address Extension (PAE)36 bit
Weight and Dimensions IconWeight and Dimensions
Depth443 mm
Width180 mm
Height373 mm

Related product manuals