10
Turning the Projector On/Off
Turning on the Projector
1 Ensure that the power cord and signal cable are securely connected. The
Power indicator LED will solid red.
2 Turn on the projector by pressing "Power" button on the control panel or
remote control, and the Power indicator LED will turn blue.
3 Turn on your source (computer, notebook, video player ,etc.). The
projector will detect your source automatically.
• If you connect to multiple sources at the same time, use the "Source"
button on either control panel or the remote control or direct source
key on the remote control to switch between inputs.
Turning the projector off
1 To turn the projector off, press and hold the power button. This message
appears: "Power Off? Press power key again." Press the power button
again.
2 The LED power indicator will turn RED and blink rapidly after the projector
is turned off, and the fan(s) will continue to operate for about 10 minutes
to ensure that the system cools properly.
3 Once the system has finished cooling, the LED power indicator will stop
blinking and turn solid red to indicate standby mode.
4 It is now safe to unplug the power cord.
To Next Page
Loading...
Need help?
General
