Acer P1265 User Manual

38
English
Ceiling Mount Installation
If you wish to install the projector using a ceiling mount, please refer to the
steps below:
1 Drill four holes into a solid, structurally sound part of the ceiling, and
secure the mount base.
Note: Screws are not included. Please obtain the appropriate
screws for your type of ceiling.
2 Secure the ceiling rod using the appropriate type of four-cylinder screws.
Ceiling Mount Base
- Attach to ceiling
Screw Type A
50 mm length / 8 mm diameter -
Long Rod
Extension Rod
Long Cylinder Cap
Allen Key
- For tightening/loosen
i
Tightening Screw
Medium Rod
Ceiling Mount Base
http://www.pureglare.com.au

Acer P1265 Specifications

General

Number of colors	16.78 million colors
Projection distance	1 - 11.9 m
Vertical scan range	56 - 85 Hz
Horizontal scan range	31.5 - 100 kHz
Projection technology	DLP
Contrast ratio (typical)	2000:1
Screen size compatibility	0.58 - 7.62 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	±40 °
Aspect ratio	4:3, 16:9
RS-232 ports	1
Dimensions (WxDxH)	299 x 229 x 93 mm
Throw ratio	1.95 - 2.15:1
Lamp type	P-VIP
Lamp power	180 W
Light source type	Lamp
Service life of light source	3000 h
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	28 dB
Market positioning	Presentation

Weight and Dimensions

Weight	3000 g