Acer Predator PO3-600 User Manual

Upgrading your Computer -
17
Graphic board
The computer contains one or two Graphic boards installed in
the PCIe x16 slots. The detail configuration will be differed by
different models.
Removing the Graphic board
1. Perform Pre-installation instructions on page 6.
2. Remove the 3.5-inch hard drives. See removing the
3.5-inch hard drives.
3. Disconnect the power cables from the Graphic board.
4. Remove the screw that secure the Graphic boards to
the chassis.
Downloaded from www.vandenborre.be

Acer Predator PO3-600 Specifications

General

Memory	16GB DDR4
Operating System	Windows 10 Home
Power Supply	500W
Optical Drive	DVD-RW
Networking	Gigabit Ethernet, 802.11ac Wi-Fi
Ports	USB 2.0, USB 3.1, HDMI, DisplayPort