Acer Projector User Manual

11
... English
Installation
Power/Standby
Powering On the Projector
1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will flash
red
.
3. Turn on the lamp by pressing “Power/Standby” button on
the control panel.

And the Power LED will turn
blue
.
4. Turn on your source (computer, notebook, video player
,etc.). The projector will detect your source automatically.

If the screen displays “No Signal”, please make sure the signal
cables are securely connected.

If you connect multiple sources at the same time, using the
“Source” button on the remote control or control panel to
switch.
Powering On/Off the Projector

Turn on the projector
first and then the signal
sources.
1

Acer Projector Specifications

General

Brand	Acer
Model	Projector
Category	Projector
Language	English