23
... English
User Controls
Rear-Ceiling
When you select this function, the projector reverses
and turns the image upside down at same time. You can
project from behind a translucent screen with ceiling
mounted projection.
Menu Location
Choose the Menu location on the display screen.
Sharpness
Adjusts the sharpness of the image.
Press the to decrease the sharpness.
Press the to increase the sharpness.
H. Position (Horizontal Position)
Press the to move the image left.
Press the to move the image right.
V. Position (Vertical Position)
Press the to move the image down.
Press the to move the image up.
Frequency
“Frequency”changes the display data frequency to match the fre-
quency of your computer’s graphic card. If you experience a
vertical flickering bar, use this function to make an adjustment.
Image
(Computer / Video
Mode)
“Sharpness” functions
is not supported under
DVI and Computer
mode.
“H. Position”, “V.
Position”, “Frequency”
and “ Tracking” func-
tions are not supported
under DVI and Video
mode.
To Next Page
Loading...
Need help?
General
