28
English ...
Management (Computer
/ Video Mode)
Acer eOpening Management
is a PC utility
for user to change the default start-up screen of Acer
projector to their desired image. You can install
Acer
eOpening Management
from the bundled CD. Con-
nect the projector to your PC with the bundled USB
cable then execute
Acer eOpening Management
util-
ity to download your desired image from your PC to
projector. Before the download starts, the projector
must enter “Download Mode” first. Please follow
the instruction below to enter “Download Mode”.
1. If the projector was turned on, press power button twice to turn
off the projector.
2. Unplug the AC power cord from the projector.
3. Press and hold “Menu” and “ “ buttons simultaneously then
plug the AC power cord to the projector.
4. When Temp and Lamp LEDs are turned light, release both but-
tons, projector enters download mode.
5. Please make sure the USB cable has been connected to the projec-
tor from your PC.
Reset
Press the button after choosing “Yes” to return the display param-
eters on all menus to the factory default settings.
User Controls
To Next Page
Loading...
Need help?
General
