Acer S271HL User Manual

EN-2
ATTACHING / REMOVING THE BASE
SCREEN POSITION ADJUSTMENT
In order to optimize the best viewing position, you can adjust the tilt of the
monitor by using both of your hands to hold the edges of the monitor as
shown in the figure below.
The monitor can be adjusted to 15 degrees up or 5 degrees down as indicated
by arrow below.
Note: Remove the monitor and monitor base from its packaging.
Carefully place the monitor face-down on a stable surface -- use a
cloth to avoid scratching the screen.
1.
Attach the monitor stand arm to the
base.
2.
Ensure that the base is locked onto the
monitor stand arm.
HDMI
DC IN
D-SubDVI
HDMI
DC IN
D-SubDVI

Acer S271HL Specifications

General

3D	No
Aspect ratio	16:9
Response time	6 ms
Display surface	-
Display diagonal	27 \
Contrast ratio (dynamic)	100000000:1
Display number of colors	16.78 million colors
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
HDCP	Yes
USB Type-A downstream ports quantity	0
Product color	Black
Tilt angle range	-5 - 15 °
Panel mounting interface	- mm
AC input voltage	110 - 220 V
Energy efficiency scale	A to G
Power consumption (standby)	- W
Cables included	AC, DVI, VGA

Weight and Dimensions

Weight (without stand)	- g