Acer S271HL User Manual

EN-9
USER CONTROLS
Base Controls
Power Switch / Power LED:
To turn the monitor ON or OFF.
Lights up to indicate the power is turned ON.
W / X Minus / Plus:
If the OSD is active, press the Minus or Plus buttons to toggle between the OSD
options.
MENU OSD functions
Press this botton to activate the OSD menu.
AUTO Auto Adjust:
Press this button to activate the Auto Adjustment function. The Auto Adjustment
function is used to set the HPos, VPos, Clock and Focus.
Empowering:
Press the Empowering Key to open the Acer eColor Management OSD and access the
scenario modes.

Acer S271HL Specifications

General

3D	No
Aspect ratio	16:9
Response time	6 ms
Display surface	-
Display diagonal	27 \
Contrast ratio (dynamic)	100000000:1
Display number of colors	16.78 million colors
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
HDCP	Yes
USB Type-A downstream ports quantity	0
Product color	Black
Tilt angle range	-5 - 15 °
Panel mounting interface	- mm
AC input voltage	110 - 220 V
Energy efficiency scale	A to G
Power consumption (standby)	- W
Cables included	AC, DVI, VGA

Weight and Dimensions

Weight (without stand)	- g