Acer S271HL User Manual

EN-4
POWER SAVING
The monitor will be driven into Power Saving” mode by the control signal
from the display controller, as indicated by the amber-color power LED.
The power saving states will be kept until a control signal has been detected
or the keyboard or mouse is activated. The recovery time from Active OFF
state back to ON state is around 3 seconds.
DDC
To make your installation easier, the monitor is able to Plug and Play with
your system if your system also supports DDC protocol. The DDC (Display Data
Channel) is a communication protocol through which the monitor
automatically informs the host system about its capabilities, for example,
supported resolutions and corresponding timing. The monitor supports
DDC2B standard.
State LED Light
ON Blue
Power Saving Mode Amber

Acer S271HL Specifications

General

3D	No
Aspect ratio	16:9
Response time	6 ms
Display surface	-
Display diagonal	27 \
Contrast ratio (dynamic)	100000000:1
Display number of colors	16.78 million colors
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
HDCP	Yes
USB Type-A downstream ports quantity	0
Product color	Black
Tilt angle range	-5 - 15 °
Panel mounting interface	- mm
AC input voltage	110 - 220 V
Energy efficiency scale	A to G
Power consumption (standby)	- W
Cables included	AC, DVI, VGA

Weight and Dimensions

Weight (without stand)	- g