Acer X1123H User Manual

12
English
Turning Off the Projector
1 To turn the projector off, press the power button. This message
appears:
"Please press power button again to complete the shutdown process"
Press the power button again.
2 The LED Power indicator will turn solid red to indicate standby mode.
3 It is now safe to unplug the power cord.
When Instant Resume is selected:
1 The LED Power indicator will turn RED and blink rapidly after the
projector is turned off, and the fan(s) will continue to operate for
about 2 minutes to ensure that the system cools properly.
2 As long as the power cord remains plugged in, you can press the
power button to turn the projector immediately back on anytime
during the 2-minute shutdown process.
3 Once the system has finished cooling, the LED Power indicator will
stop blinking and turn solid red to indicate standby mode.
4 It is now safe to unplug the power cord.
Warning indicators:
• "Projector Overheated. Lamp will automatically turn off soon."
This onscreen message indicates that the projector has overheated.
The lamp will automatically turn off, the projector will automatically
shut down, and the LED Temp indicator will turn solid red. Contact
your local dealer or service center.
• "Fan failed. Lamp will automatically turn off soon."
This onscreen message indicates that the fan has failed. The lamp will
automatically turn off, the projector will automatically shut down,
and the LED Temp indicator will blink. Contact your local dealer or
service center.
Note: Whenever the projector automatically shuts down and
the
LED Temp indicator turns solid red, contact your local
reseller or service center
.

Acer X1123H Specifications

General

Power source	AC
AC input voltage	120 - 230 V
Power consumption (standby)	- W
Power consumption (typical)	260 W
Power consumption (economy mode)	205 W
Number of colors	1.073 billion colors
Native aspect ratio	4:3
Projection distance	1 - 10 m
Projection technology	DLP
Supported aspect ratios	4:3, 16:9
Contrast ratio (typical)	20000:1
Screen size compatibility	- \
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	-40 - 40 °
Vertical synchronization (max)	0.12 kHz
Vertical synchronization (min)	0.024 kHz
Horizontal synchronization (max)	100 kHz
Horizontal synchronization (min)	15 kHz
RS-232 ports	0
Maximum digital resolution	1920 x 1200 pixels
Focus	Manual
Throw ratio	1.96 - 2.15:1
Digital zoom	2 x
Optical zoom	1.1 x
Focal length range	22 - 24.1 mm
Aperture range (F-F)	2.56 - 2.68
Lamp type	OSRAM
Lamp power	203 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	10000 h
DVI port	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN	-
Noise level	30 dB
Projection modes	Ceiling, Front, Rear
Noise level (economic mode)	26 dB
Analog signal format system	NTSC, PAL, SECAM
Mac compatibility	Yes
RMS rated power	3 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 90 %
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	Black
Cables included	AC, VGA

Weight and Dimensions

Weight	2400 g