Acer X193W User Manual

27
OSD Message
a. Outline
b. The Description For OSD Message
Item Description
Auto Config
Please Wait
When Analog signal input, if User Press Hot-
Key “Auto”, will show this message, and the
monitor do the auto config function.
Input Not
Supported
Whe
n the Hsync Frequency, Vsync Frequency or Resolution is out of the monitor
support range, will show this message. This message will be flying.
Cable Not
Connected
Analog-
Only Model: When the video cable is not connected, will show this message.
This message will be flying.
No Signal
Analog-
Only Model: When the video cable is connected, but there is no active signal
input, will show this message, then enter power saving.

Acer X193W Specifications

General

Pixel pitch	0.284 mm
Display diagonal	19 \
Display resolution	1440 x 900 pixels
Vertical scan range	56 - 60 Hz
Horizontal scan range	24 - 80 kHz
Viewable size, vertical	255 mm
Contrast ratio (typical)	2000:1
Viewable size, horizontal	408 mm
Viewing angle, horizontal	160 °
Display brightness (typical)	300 cd/m²
Certification	UL, CUL, TUV/GS, T-Mark, ISO9241-3/-7/-8, FCC/B, VCCI, CE, C-tick, BSMI, WHQL, ISO 13402-6
Product color	Black
Market positioning	-
Cable lock slot	Yes
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Power requirements	100 - 240 VAC, 50 - 60 Hz
Power consumption (off)	1 W
Power consumption (standby)	2 W
Power consumption (typical)	37 W

Weight and Dimensions

Depth (with stand)	163.7 mm
Width (with stand)	454.3 mm
Height (with stand)	359.2 mm
Weight (without stand)	4400 g