20
NAVIGATING GLOBAL MODE
1. Press [GLOBAL] to enter Global Mode.
2. Use [<] and [>] to navigate through the available pages of
options (shown below).
3. Use the [VALUE] dial to change settings, values or select a
message on the selected page.
4. Press [ENTER] to accept the change or send a message
or press [<] to cancel.
GLOBAL MODE
In Global Mode, you can send
global messages and make general
changes to the way that your
MPD26 functions. Global Mode
options are organized under
different pages and include the list
of options shown below.
KILL MIDI
Send an All Notes Off or Reset Controllers message Page 1
MIDI COMMON CHANNEL
Select which MIDI channel will be used as the
Common Channel.
Page 2
LCD CONTRAST
Adjust the contrast of the display. Page 3
PAD SENSITIVITY
Adjust how sensitive the pads are to the touch. Page 4
PAD VELOCITY CURVE
Adjust how the pads will output MIDI velocity, based
on the force applied to them.
Page 5
PAD THRESHOLD
Adjust the threshold of minimum force required to
activate a pad.
Page 6
MIDI CLOCK
Select Internal or External MIDI Clock source. Page 7
TAP TEMPO AVERAGE
Select the number of taps to be averaged in
determining tempo.
Page 8
SAVE SETUP
Save the current global settings. Page 9
SYSEX TX
Transfer a Preset via SysEx. Page 10
VERSION
Check the current firmware version. Page 11
To Next Page
Loading...
Need help?
General
