4. Ensure the four wheels are assembled at the same height
level and rotate smoothly.
Place the lawnmower on its side when tightening each wheel
(See Fig E).
IMPORTANT! Ensure all four wheels are securely tightened
before each use.
Mounting the lower handle bar
1. Insert the lower handle bars into the supports. Ensure the
mounting holes in the lower handle bars are aligned with the
ones in the supports (See Fig F).
2. Secure the lower handle bars with the screws and tighten
them with a suitable crosshead screwdriver.
Mounting the upper handle bar
1. Remove the bolts from the knobs and keep them handy.
2. Attach the upper handle bar to the lower handle bars and
align the holes in the upper handle bar with the ones in the
lower handle bars (See Fig G, H & I).
3. Secure the upper handle bar with the knobs and bolts to the
lower handle bars and tighten the knobs clockwise.
To Next Page
Loading...
Need help?
General
