Maintenance
1. Always switch the product off, disconnect it from the power
supply and let the product cool down before performing
inspection, maintenance and cleaning work!
2. Keep the product clean. Remove debris from it after each use
and before storage.
3. Regular and proper cleaning will help ensure safe use and
prolong the life of the product.
4. Inspect the product before each use for worn or damaged
parts. Do not operate it if you find broken or worn parts.
WARNING!
Only perform repairs and maintenance work according
to these instructions. All further works must be
performed by a qualified specialist.
Maintenance after each use
1. Clean the product with a dry cloth. Use a brush for areas that
are hard to reach.
2. Clean the air vents after every use with a cloth and brush.
3. Remove stubborn dust with high pressure air (max. 3 bar).
4. Check for any damage or wear. Repair damage in accordance
To Next Page
Loading...
Need help?
General
