ALLEN & HEATH DLIVE S5000 User Manual

Surface Getting Started Guide
16
AP9899 Issue 3
3.4 Working with the Mix
Press a Main Mix master strip Mix key.
This is the normal mixing mode. The Input strips
present the channel faders. The Master strips
present the master mix faders.
Hold down the Assign key and press channel
Mix keys to assign or unassign them from the
main mix. Current ON status is displayed on the
lower part of the strip LCDs.
Mix
Aux3
Mix
IP 1 IP 2 IP 3 IP 4 IP 5 IP 6 IP 7 IP 8 Aux1 Aux2
LR
Channel faders Master faders
+ press Mix
ON
Normal mix mode (FOH)
Assign Routing

Main Mix active
hold
down
Press a Mix master strip Mix key.
Use this to work with Aux and FX sends. The
Input strips present all the send levels to the
active Mix. The Master strips present the master
mix faders.
Hold down the Assign key and press channel
Mix keys to assign or unassign them from the
active Mix.
Hold down the Pre/Post key and press channel
Sel keys to toggle each source pre or post fader.
Current PRE status is displayed on the lower part
of the channel strip LCDs.
You can quickly set all assignments on or off, or
all sources pre or post fader by pressing the
Master strip Mix or Sel key.
All sends to one master Master faders
Aux3
Sel
Mix
IP 1 IP 2 IP 3 IP 4 IP 5 IP 6 IP 7 IP 8 Aux1
Aux2
+ press Mix Assign Routing
ON
all
+ press Sel Pre/Post
PRE
Master Mix


all
Aux4
view
Access Aux, FX, Matrix mix on faders
hold
down
Press an Input Channel strip Mix key.
Use this to work with Aux and FX sends. The Input
strips remain as Channel Faders. The Master
strips present all sends from the Input channel.
Hold down the Assign key and press master Mix
keys to assign or unassign the channel from each
mix.
Hold down the Pre/Post key and press master Sel
keys to toggle the channel pre or post fader to
each mix. Current PRE status is displayed on the
master strip LCDs.
IP 6 IP 7 IP 8 Aux1 Aux2
ONPRE
Channel faders
Aux3
Sel
Mix
Channel Mix
Assign Routing
Pre/Post


Aux4
All sends from one input
view
IP 5
IP 4
hold
down
Press a Group Master strip Mix key.
Use this to assign channels to the Audio and DCA
groups. The Input and Master faders are not
affected.
Hold down the Assign key and press channel Mix
keys to assign or unassign the channels from the
group.
IP 4 IP 5 IP 6 IP 7 IP 8 Grp1 Grp2
+ press Mix all
DCA
Mix
DCA and Audio Group assign
Assign
DCA2

ON
DCA
1
hold
down

ALLEN & HEATH DLIVE S5000 Specifications

General

Brand	ALLEN & HEATH
Model	DLIVE S5000
Category	DJ Equipment
Language	English