ML3000 Service Manual 21
The Range
ML3000-24 24 mono, 2 stereo input - Live sound console
ML3000-32 32 mono, 2 stereo input - Live sound console
ML3000-40 40 mono, 2 stereo input - Live sound console
ML3000-SLV2 SYS-LINK V2 kit - ML3000
RPS11 3U power supply unit - For ML3000 console
002-223 2.9 metre DC power lead – To connect RPS11 power supply to console
RPSD2 Dual supply Combiner / Monitor
002-617 2.8 metre 37way Audio cable - To link sidecar to console
AL4155 2.8 meter 9way Logic cable - To link sidecar to console
AP4512 ML3000 Console User Guide
AP4511 ML3000 Console Service Manual
AP2725 RPS11 Power Supply User Guide
AP2263 RPSD2 User / Installation guide
AL4061 Gooseneck lamp 18”
AP4508 24 Channel vinyl dustcover
AP4509 32 Channel vinyl dustcover
AP4510 40 Channel vinyl dustcover
SERVICE TOOLS
The tools required to service the ML3000 are standard to an electronics service workshop and are
easily obtainable. The following items are necessary for disassembly and service access:
TOOL USE ORDER CODE
4mm Hexagon (Allen) key M6 side trim AT0033
1-point Crosshead screwdriver M3, 4AB AT0004
2-point Crosshead screwdriver M4, 6AB, 8B AT0002
11mm AF Nutdriver
Potentiometer and headphone socket
nuts
12mm Nutdriver Jack nuts
1.27mm Hexagon (Allen) key PSU DC Leads AT4142
2.5MM hexagon (Allen) key M4 Sidetrim
5.5mm AF Spanner Fader PCB M3 Hex
5mm Nutspinner D-Type Screws
Torx-headed screwdrivers Torx-headed screws
To Next Page
Loading...
Need help?
General
