AP4721 ML3000-SLV2 Fitting Notes 1
These are the instructions for fitting the SYS-LINK Version 2 console expander option kit to
the ML3000 console. This work must be carried out by technically qualified service personnel
only.
Whilst we believe this information to be reliable we do not assume responsibility for
inaccuracies. We also reserve the right to make changes in the interest of further product
development.
For information on how to use the SYS-LINK option please refer to the Applications Note
AP4722. For further information on the ML3000 console refer to User Guide AP4512 and
Service Manual AP4511.
Contents.
Check the contents of your ML3000-SLV2 kit:
1 x 002-634 PCB Assembly ML3 SYS-LINK II IN
1 x 002-636 PCB Assembly ML3 SYS-LINK II OUT
3 x AK0151 Cable Tie 2.6 x 90mm
2 x AH4131 37way D-type Audio Cable ML5 SYS-LK
1 x AL4155 9way D-type RS422 Cable ML5-SC
1 x AL4684 IDC Harness ML3 10way SYS-LINK Power
1 x AL4685 IDC Harness ML3 20way SYS-LINK OUT
1 x AL4686 IDC Harness ML3 26way SYS-LINK IN
1 x AP4721 Fitting Instructions (This document)
1 x AP4722 Applications Note
ALLEN&HEATH ML3000 SYS-LINK AP4721 issue 1
Fitting Instructions for ML3000-SLV2 Kit
To Next Page
Loading...
Need help?
General
