ALLEN & HEATH Qu-16 Setting Up

Surface (not available on Qu-SB) – Scroll through the list of options to
choose the sources for the mixer Alt Out and AES Out sockets.
dSNAKE In – Patch remote AudioRack sockets to the mixer channels. You
can patch one socket to one or more channels. A channel can only have one
socket patched to it.
dSNAKE Out – Patch Qu mixes to remote AudioRack output sockets. You
can patch one mix to one or more sockets.
Monitor – Patch Qu signals (channel direct outputs and mixes) to the
optional ME personal monitor system channels. The ME system can receive
up to 40 channels via the mixer dSNAKE port.
It is typical to set the direct outputs to Post-PEQ and Follow Mute for this
purpose. The global direct out setting is in the channel Preamp Routing page.
USB Audio – Patch Qu signals to the Qu-Drive stereo and multitrack record
USB drive, and to the USB B streaming outputs. These use the same patch
shared as follows:
 Qu-Drive Multitrack = Track 1 to 18
 Qu-Drive Stereo = Track 17, 18
 USB B Streaming = Track 1 to 32
The channel send default source is Insert Sends (no processing). You can
change this to Direct Outputs using an option button if you wish to record a
different point in the signal path.

ALLEN & HEATH Qu-16 Specifications

General

Sample rate	48 kHz
Channels quantity	16 channels
Digital sound processing	- bit
Output impedance	75 Ω
Built-in display	Yes
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (typical)	82 W
XLR out	12
RJ-45 ports quantity	1
Headphone connectivity	6.3 mm
Number of microphone inputs	16
DJ mixer	-
Product color	Black
USB connector type	USB Type-A, USB Type-B

Weight and Dimensions

Depth	500 mm
Width	440 mm
Height	186 mm
Weight	10000 g
Package depth	680 mm
Package width	610 mm
Package height	350 mm
Package weight	13500 g