ALLEN & HEATH Qu-16 Reference Guide

Qu Mixer Reference Guide 24 AP9372 iss.9
6.3 Working with the sends on faders:
 Select a Mix - Press a Mix key. The master strip presents the
mix fader and controls. The channel faders move to present
the sends to that mix.
 Adjust Send levels – For Mix and FX sends. Move the
channel faders. These become the sends to the selected mix.
 Adjust Send pans - While a stereo Mix is selected, press a
channel Sel key and use the Pan control to pan its send in
the mix.
 Assign sends to the mix – Hold the Assign key to view the
current channel assignments (routing) to the mix. The Sel
keys light when the channel is assigned to the mix. To toggle
individual assignments on or off, press channel Sel keys
while holding Assign.
 To toggle all assignments on or off - Hold the Assign key
and press the master strip Sel key.
 Set sends Pre or Post fader – For Mix and FX sends. Hold
the Pre Fade key to view the current channel pre/post fade
settings for the mix. The Sel keys light when set to Pre-fade.
To toggle individual sends pre or post, press the channel Sel
keys while holding Pre Fade. It is typical to use Pre-fade for
monitor sends and Post-fade for effects sends.
 To toggle all sources Pre or Post Fade - Hold the Pre Fade
key and press the master strip Sel key.
 Group mixes – Selecting a Grp mix lets you assign channels
and FX returns to the group. The LR mix channel faders and
pan positions remain active. Groups are not available on the
Qu-16. The Mix key lights purple if configured as a Group, or
blue if configured as a Mix.
 Press the Mix key again or press LR to return to the main
mix, or press another Mix key to adjust a different mix.
 Always remember to return to the main LR mix once you have
finished adjusting monitor or effects levels.
Qu-16
Qu-24 and 32
Sends on faders
Pre/Post
Assign
Toggle individual sources
Toggle all sources
Hold and then press Sel

ALLEN & HEATH Qu-16 Specifications

General

Sample rate	48 kHz
Channels quantity	16 channels
Digital sound processing	- bit
Output impedance	75 Ω
Built-in display	Yes
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (typical)	82 W
XLR out	12
RJ-45 ports quantity	1
Headphone connectivity	6.3 mm
Number of microphone inputs	16
DJ mixer	-
Product color	Black
USB connector type	USB Type-A, USB Type-B

Weight and Dimensions

Depth	500 mm
Width	440 mm
Height	186 mm
Weight	10000 g
Package depth	680 mm
Package width	610 mm
Package height	350 mm
Package weight	13500 g