EasyManuals Logo
Home>ALLEN & HEATH>Music Mixer>Qu-32

ALLEN & HEATH Qu-32 User Manual

ALLEN & HEATH Qu-32
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Qu Mixer User Guide 30 AP9372 iss.4
Mix Routing
Select a mix master Sel key while the Routing screen
is active to:
Adjust the Output Balance between Left and Right of
a stereo mix or LR.
Choose the global Channel Source for the selected
mix. This is the point in the channel signal path that
feeds the mix.
Choose Post-Preamp if you want the sources to
the mix to not be affected by any of the channel
processing.
Choose Pre-EQ for a monitor mix if you do not
want the channel EQ to affect the monitor.
Choose Post-EQ if you want the EQ but not the
compressor to affect the monitor.
Choose Post-All processing for FX sends.
Mix to Matrix Sends (not Qu-16)
The Qu-24 and Qu-32 include two stereo Matrix mixes.
These are not available on the Qu-16.
The Groups, Mixes and LR can be sent to the Matrix.
The sends to the matrix can be set Pre or Post the
send master fader. Each send can be assigned On or
Off. Its Level and Pan to the matrix can be adjusted
here.
Matrix All Sends View
To work with the sends and assignments from all
mixes to one matrix use the Matrix master
Routing screen Fn key Matrix View.
Touch a mix source box. Use the right of the
screen to adjust its parameters. Touch the
buttons and value boxes and use the screen
Rotary.
6.10 Working with the Matrix (not Qu-16)
A Matrix is a ‘mixer within the mixer’. Inputs route to
the Groups, Mixes and LR. These can then be routed
to the Matrix to provide additional outputs, for
example:
Stereo recording, video or broadcast
Delay fill speakers
Access the Matrix masters using the top fader Layer,
or assign them to the Custom Layer.
Patch the Matrix to Alt Out, AES Out and USB audio.
Each Matrix provides:
Stereo mixing
Source send Levels, Pan and Assign
Master Fader and Mute
Output Balance
PEQ
GEQ
Compressor
Delay
FX Insert
HPF GATE PEQ COMP
DELAY
0
Gain/Trim
Insert
Post-Preamp Pre-EQ Post-EQ Post-All

Table of Contents

Other manuals for ALLEN & HEATH Qu-32

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ALLEN & HEATH Qu-32 and is the answer not in the manual?

ALLEN & HEATH Qu-32 Specifications

General IconGeneral
Sample rate48 kHz
Channels quantity32 channels
Digital sound processing- bit
DJ mixer-
USB portYes
Product colorBlack
USB connector typeUSB Type-B
XLR out2
Master (XLR) out24
RJ-45 ports quantity1
Power consumption (typical)- W
Output impedance75 Ω
Weight and Dimensions IconWeight and Dimensions
Depth471 mm
Width849 mm
Height190 mm
Weight20000 g
Package typeBox
Package depth680 mm
Package width1000 mm
Package height350 mm
Package weight24000 g

Related product manuals