Address, Inc/Dec, MIDI Ch
Ip1 to LR, Increment, Ch1
B0 63 40 B0 62 00 B0 60 00
Grp5 to LR, Decrement, Ch5
B4 63 40 B4 62 34 B4 61 00
FX2Rtn to Aux3, Increment, Ch12
BB 63 46 BB 62 22 BB 60 00
3.5 Panning/Balance
Panning (mono sources) or balance (stereo sources) can be set using either
absolute values or in relative increments/decrements.
MSB and LSB represent a parameter number showing where the signal is
being sent from and where it is being sent to.
MSB/LSB parameter numbers are shown in the reference tables.
Absolute values are set with a combination of coarse and fine values. Ranging
from 00 00 (full left) to 7F 7F (full right), with centre being 3F 7F.
See ‘Example Pan/Balance Values’ in the reference tables.
Where: N= MIDI Channel, MB/LB = MSB/LSB Parameter number, VC/VF = Value
Examples:
B0 63 50 B0 62 00 B0 06 00 B0 26 00
B0 63 50 B0 62 00 B0 06 3F B0 26 7F
B0 63 50 B0 62 17 B0 06 4C B0 26 65
B0 63 52 B0 62 5C B0 06 4C B0 26 65
B3 63 52 B3 62 5C B3 06 1F B3 26 7F
B3 63 55 B3 62 1D B3 06 1F B3 26 7F
BA 63 5E BA 62 26 BA 06 7F BA 26 7F
A relative pan/balance message uses the same parameter number, but with
an increment or decrement byte. Incrementing moves to the right and
decrementing moves to the left.