ALLEN & HEATH SQ-6 User Manual

 6
MIDI Protocol – ISSUE 1
1.4 DAW Control Driver
The SQ has 32 MIDI fader strips and options for Soft Keys that enable it to be
used as a control surface for all major Digital Audio Workstations through use
of the DAW Control Driver.
The DAW Control Driver is a program that connects to the SQ via MIDI over
USB or TCP/IP and creates virtual MIDI ports in the computer. It can then
translate MIDI messages from the SQ into either HUI or MCU control surface
messages for use with a DAW.
In addition to the translations, a ‘MIDI Thru’ option is provided which allows
MIDI messages to pass through unaffected. This is the easiest way to
communicate with an SQ on a network by using MIDI over TCP/IP.
Visit the Allen & Heath website (www.allen-heath.com) to download the latest
version of the DAW Control Driver and read the DAW Control Help document
for information on setup and configuration.
SQ-5 / SQ-6 / SQ-7
A&H DAW
Control Driver
DAW
PC / mac
MIDI OVER USB
MIDI OVER TCP/IP
DAW Control MIDI 1 to 4

ALLEN & HEATH SQ-6 Specifications

General

Channels quantity	48 channels
Supported sample rates	96 kHz
Digital sound processing	- bit
DJ mixer	-
Product color	Black
Output impedance	75 Ω
MIDI out	Yes
RJ-45 ports quantity	1
Power consumption (typical)	- W

Weight and Dimensions

Depth	514.9 mm
Width	638 mm
Height	198 mm
Weight	14500 g
Package depth	680 mm
Package width	820 mm
Package height	360 mm
Package weight	17300 g