Allen & Heath 14 XONE:1D User Guide
MIDI CHANNEL NUMBER AND MAP
Changing the MIDI Map
Once the MIDI channel number has been stored the
illuminated switch to the far right of the unit will flash
indicating that the MIDI map may now be selected.
Pressing the first illuminated switch will set the MIDI Map
to Map 1 (for use with NI Traktor).
Pressing the second illuminated switch will set the MIDI
Map to Map 2 (for Ableton or general use).
When the desired MIDI map has been selected, press and release the switch on the
encoder above the jog wheel. The illuminated switches will flash once indicating that the
MIDI map has been stored and that the unit is now in its normal operating mode.
For a tutorial video demonstrating how to change the MIDI channel and MIDI map on the
Xone:1D, visit the Xone website:
www.xone.co.uk
and follow the link to the Xone:1D.
NOTE: the Xone:1D is a USB device and so, in windows, it should be “safely removed”
as with other USB devices.
To Previous Page
Loading...
Need help?
General
