Allen-Bradley 22C-D088A103 User Manual

Rockwell Automation Publication 22C-UM001J-EN-E - January 2017 17
Installation/Wiring Chapter 1
Figure 3 - Frame F Mounting Clearances
Figure 4 - Frames G & H Mounting Clearances
Debris Protection
Frame C Drives – A plastic top panel is included with the drive. Install the
panel to prevent debris from falling through the vents of the drive housing
during installation. Remove the panel for IP 20/Open Type applications.
Frame D, E, F, G and H Drives – These drives have built-in debris protection.
Installation of a protective panel is not required.
250 mm
(9.8 in.)
150 mm
(6.0 in.)
50 mm
(2.0 in.)
50 mm
(2.0 in.)
300 mm
(11.8 in.)
300 mm
(11.8 in.)
200 mm
(1)
(7.9 in.)
200 mm
(1)
(7.9 in.)
(1)
(1) If the drive is installed with a side gap of 200 mm, it has to be removed from the shelf to change the fan. If the drive
is installed with a side gap of 300 mm, it does not need to be removed from the shelf to change the fan.

Allen-Bradley 22C-D088A103 Specifications

General

Brand	Allen-Bradley
Model	22C-D088A103
Category	Controller
Language	English