Alpine CDE-148EBT User Manual

31-EN
Hands-Free Phone Control
Hands-free calls are possible when using a HSP (Head Set Profile) and
HFP (Hands-Free Profile) compatible Smartphone with this unit.
Notes
• Avoid performing a hands-free call in heavy traffic or on narrow or
winding streets.
• Close the windows while calling to reduce background noise.
• If both calling parties are using hands-free devices, or the call is made in
a noisy location, difficulty hearing the other person’s voice is normal.
• Depending on telephone line conditions or certain mobile devices used,
voices may sound unnatural.
• When using a microphone, speak as directly as you can into the
microphone to pick up the best sound quality.
• Certain Smartphone features are dependent on the capabilities and
settings of your service provider’s network. Additionally, certain features
may not be activated by your service provider, and/or the provider’s
network settings may limit the feature’s functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well as
the information contained in the Owner’s Manual are based upon the
latest available information and are believed to be accurate at the time
of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.
Incoming calls are announced by the received call ring tone and a
displayed message (Phone).
Press f or press /ENTER.
The call starts.
Notes
• When “Auto Answer” is set to ON, you can receive a call automatically.
Refer to “Setting the Received Calls automatically (Auto Answer)” on
page 30.
• While calling, the source sound on the unit is muted. After calling,
playback will resume.
Press f.
The call finishes.
Note
• You can also hang up the call by pressing r.
When a Smartphone equipped with voice recognition function is paired
with this unit, the Smartphone can be controlled by Voice Control via
this unit.
Press and hold VOICE CTRL. for at least 2 seconds to
activate the Voice Recognition mode.
After the Voice Recognition mode is activated and “Speak” is
displayed, you can make a phone call, play a song, etc., via this
unit by inputting voice control commands
*
.
* Please refer to your smartphone manual for other voice control
commands.
Notes
• You can perform this operation only when a Voice recognition
compatible Smartphone is connected. If the Smartphone is not
compatible with the Voice recognition, “No Support” is displayed for 2
seconds.
• The Voice recognition function performance depends on the recognition
range of the Smartphone and mounting location of the microphone.
Please pay attention when the microphone is mounted.
• Voice recognition operation depends on the function of the Smartphone.
For details, refer to the Owner’s Manual of the Smartphone.
• If a called person that you say is not found, “No Call” is displayed for 2
seconds.
• Please obey all local traffic laws while using this function.
Call History is recorded for the last dialled/received/missed calls (20
records for each). There are various ways of making calls based on the
“Calling”. The following steps 1 to 5 are common to the various ways of
making these calls. For details, refer to each individual category for
making calls.
1 Press f.
The outgoing method list is displayed.
2 Turn the Rotary encoder to select the outgoing mode.
Setting contents:
Dialed / Received / Missed / Phone Book
Dialed:
Dialled history
Received:
Received history
Missed:
Missed incoming history
Phone Book:
Smartphone phone book
3 Press ENTER.
The outgoing mode is activated, and each mode list is displayed.
Note
• It may take some time for the list to be displayed, and also directly after
connection, the list may not be brought up to date.
4 Turn the Rotary encoder to select a name or a telephone
number from the list.
Note
• You can use Phone book alphabet search function to search a name or
number from Phone Book. For details, refer to “Phone book Alphabet
Search Function” on page 32.
5 Press ENTER.
The selected telephone number will be called.
If one name has several numbers registered in the telephone
book, press ENTER after selecting the name
*
, then turn the
Rotary encoder to choose the desired number and press
ENTER, the telephone will be called.
* If the name cannot be recognized, “No Name” will be displayed.
Notes
•Press r to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
About the Hands-Free Phone
Answering a Call
Hanging up the Telephone
Voice Control Operation
Calling
00ALPINE.book Page 31 Friday, January 11, 2013 10:01 AM

Alpine CDE-148EBT Specifications

General

Brand	Alpine
Model	CDE-148EBT
Category	Car Receiver
Language	English