Alpine CDE-148EBT User Manual

36-EN
Setting the iPod Control
When an iPod/iPhone is connected, operate it from its own controls or
from the head unit.
1 Press and hold ENTEROPTION for at least 2 seconds
in the iPod mode.
The Option menu for iPod mode is activated.
2 Turn the Rotary encoder to select “APP Direct”, and then
press ENTER.
The iPod control mode will switch between iPod Mode and HU
Mode.
HU Mode (HEAD UNIT):
Operate the iPod/iPhone via this unit.
iPod Mode:
Operate the iPod/iPhone using its own controls. When iPod is
selected, some functions will not be operable via the head unit.
Notes
• During HU Mode, you can switch to iPod Mode directly by pressing
BAND.
• Once the control mode is changed, this will set pause status, press 
to continue.
• Depending upon the iPod used, iPod control may not be selectable. Or,
if iPod is selected, operation must still be from the head unit.
Playback
1 Press VSOURCE to switch to the iPod mode.
2 Press  or  to select the desired song.
Pressing and holding  or  will fast backward/fast
forward the current song.
3 To pause playback, press .
Pressing  again will resume playback.
Notes
• A song playing on the iPod/iPhone while it is connected to this unit will
continue to play from where it was paused after disconnection.
• If you listen to an episode from a selected podcast or audiobook, the
episode can be changed by pressing 1  or  2.
• An episode may have several chapters. The chapter can be changed by
pressing  or .
Searching for a desired Song
An iPod/iPhone can contain hundreds of songs. This unit utilizes
various methods to make searches for desired content as simple as
possible.
Each music category has its own individual hierarchy as shown below.
Choose a music category from the list below to narrow searches quickly.
For example:
Searching by Artist name.
The following example explains how an Artist search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
1 Press ENTER to activate the search selection mode.
2 Turn the Rotary encoder to select the Artist search mode,
and then press ENTER.
Shuffle All
*1
 Playlist  Artist  Album  Song  Podcast 
Genre  Composer  Audiobook  Genius Mix
*2/*3
 Shuffle
All
*1
*1 Refer to “Random Play Shuffle (M.I.X.)” on page 38.
*2 Depending on the connected iPod/iPhone, Genius Mix function
may not be supported.
*3 When an iPod/iPhone with Genius Mix List created by iTunes is
connected to this unit, Genius Mix search mode can be used to
search a Genius Mix List.
3 Turn the Rotary encoder to select the desired Artist, and
then press ENTER.
4 Turn the Rotary encoder to select the desired Album, and
then press ENTER.
5 Turn the Rotary encoder to select the desired Song, and
then press ENTER.
The selected song is played back.
Notes
• After pressing and holding ENTER for at least 2 seconds while in
each hierarchy (except Song, Audiobook and Genius Mix list hierarchy),
all songs of the selected hierarchy are played back.
• After selecting [All] in the search mode, press and hold ENTER for
at least 2 seconds to play back all songs in the iPod/iPhone or selected
search mode.
• If no operation is performed for 60 seconds, the search mode is
cancelled.
• In the search mode, pressing r will return to the previous mode.
• When search is made during M.I.X. play, the M.I.X. play mode will be
cancelled.
• “No Song” will be displayed if there are no songs in the selected playlist
in the Playlist search mode.
• “No Podcast” will be displayed if there is no podcast data in the iPod/
iPhone in the Podcast search mode.
Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4
Playlist Song — —
Artist
*
Album
*
Song —
Album
*
Song — —
Song — — —
Podcast Episode — —
Genre
*
Artist
*
Album
*
Song
Composer
*
Album
*
Song —
Audiobook — — —
Genius Mix list — — —
00ALPINE.book Page 36 Friday, January 11, 2013 10:01 AM

Alpine CDE-148EBT Specifications

General

Brand	Alpine
Model	CDE-148EBT
Category	Car Receiver
Language	English