Alpine QLP542SLR-GR - Pairing the Speaker with a Bluetooth Device; Pairing an iOS Phone;Device; Pairing an Android Phone;Device; Pairing Other Cell Phones;Devices

1. Turn the speaker ON.
2. A tone will be heard and the Bluetooth indicator
light will quickly flash BLUE / GREEN.
3. Keep the speaker and Bluetooth-enabled device
within three feet of each other during the pairing
process. Set your Bluetooth-enabled device to
search for the Bluetooth devices.
4. If there are no paired devices in range when the
speaker is turned on, it will go into pairing mode
automatically. If a paired device is in range, the
speaker will connect to it automatically.
-Pairing an iOS Phone/Device:
• Go to Settings > BLUETOOTH (Make
sure Bluetooth is ON)
-Pairing an Android Phone/Device:
• Go to Settings > Connections >
Bluetooth
• Search for devices. (Make Sure
Bluetooth is ON)
-Pairing other Cell Phones/Devices:
• Review the instruction manual that
came with your phone/device.
PAIRING THE SPEAKER WITH A BLUETOOTH DEVICE
FEATURES
6
• Bluetooth 4.0
Works up to 50 ft.
• 4” Full Range
High Intensity
Speaker
• Weather Resistant
Outdoor Design
3
• Solar powered,
even on cloudy
days
• Micro USB
charging port
for fast
charging
• Lithium Ion
Rechargeable
Battery for up
to 10hrs use