Alto-Shaam Vector VMC-F4E User Manual

MAINTENANCE
Ve ct or F ® Se ries ▪ O pera to r’s Man ual ▪ MN-468 94 ▪ Rev 1 ▪ 7/2 0
103
How to Clean the Oven
Before you begin
Daily cleaning
procedure
For daily cleaning, do the following.
Step Action
1. Touch and hold the ON/OFF button a until the Shut down options screen
displays.
Touch “Shut down” b.
The oven activates the blowers for the cool-down process. The cool-down
process is complete when the oven deactivates the blowers and the display
screen turns off. When the cool-down process is complete, it is safe to clean
the oven.
2. Remove any spills with disposable paper wipes or a damp cloth.
3. Wipe the outside of the oven with a damp cloth.
4. Wipe the outside of the oven with a stainless steel cleaner.
Continued on next page
WARNING: Burn hazard.
Wear eye protection and hand protection while cleaning the
oven.
Do not spray cleaner into the oven while the blowers are
running.
Allow the oven, racks, and jet plates to cool before cleaning the
oven.
NOTICE
Do not spray any opening inside the oven with water or
cleaning solution.
Do not use steel pads, wire brushes, or scrapers when
cleaning.
VMC-TS-010640
LED
a
b

Alto-Shaam Vector VMC-F4E Specifications

General

Model	VMC-F4E
Category	Oven
Control Type	Digital
Power Source	Electric
Weight	595 lbs (270 kg)
Type	Combi Oven
Temperature Range	200°F to 500°F
Power Supply	208-240V, 60 Hz, 1-Phase or 3-Phase
Cooking Modes	Convection, Steam, Combination
Capacity	4 full-size sheet pans