Alto-Shaam Vector VMC-F4E User Manual

OPERATION
Ve ct or F ® Se ries ▪ O pera to r’s Man ual ▪ MN-468 94 ▪ Rev 1 ▪ 7/2 0
60
How to Combine Chambers
Before you begin The chambers should be off (not preheated).
Procedure
To combine chambers, do the following.
Step Action
1. Remove the jet plates a that are between the two chambers to be
combined.
2. Close the door.
3. Touch the manual cook icon b.
Continued on next page
CAUTION: Personal injury hazard.
Use hand protection when handling the jet plates.
VMC-TS-009835
a
VMC-TS-009838
b

Alto-Shaam Vector VMC-F4E Specifications

General

Brand	Alto-Shaam
Model	Vector VMC-F4E
Category	Oven
Language	English