Alto-Shaam Vector VMC-H2 Service Manual

TROUBLESHOOTING
Vector™ H Seri es ▪ Serv ic e M anua l ▪ MN- 4654 4 ▪ Re v 01 ▪ 1 1/19
62
Continued from previous page
8. Move the Set target speed button i to change the motor RPM.
If the blower speed changes, the system is working.
9. Remove the right side panel from the oven.
Touch the convection fan motor j and feel for vibration. See topic
Chamber Blower Fans Inoperable if the blower motor does not turn on.
10. Touch the convection fan button k to stop the Convection fan motor.
Result The convection fan motor has now been tested.
WARNING: Electric shock hazard. Wear PPE and use
NEC best practices when working near components
with live voltage.
VMC-TS-008155
i
VMC-TS-008158
j
VMC-TS-008160
k

Alto-Shaam Vector VMC-H2 Specifications

General

Brand	Alto-Shaam
Model	Vector VMC-H2
Category	Oven
Language	English