Alto-Shaam Vector VMC-H2 Service Manual

ASSEMBLY/DISASSEMBLY
Ve ct or ™ H Se ries ▪ S ervice Ma nual ▪ MN -4 654 4 ▪ Rev 0 1 ▪ 11/19
79
Removing and Installing a Heater Element
Before you begin ▪ The oven must be disconnected from electric power.
▪ Have a replacement heater element.
Procedure To remove and install a heater element, do the following.
Step Action
1. Open the top and remove the left side service panel.
2. Disconnect the heater element wires.
Continued on next page
WARNING: Electric shock hazard.
Disconnect the appliance from electric power before servicing
the appliance.
VMC-TS-007628
VMC-TS-002958

Alto-Shaam Vector VMC-H2 Specifications

General

Brand	Alto-Shaam
Model	Vector VMC-H2
Category	Oven
Language	English