K
Kevin StewartAug 15, 2025
What to do if Alto-Shaam Oven is under temperature?
- Jjeffrey35Aug 15, 2025
If your Alto-Shaam oven is not reaching the correct temperature, troubleshoot the heating element.
What to do if Alto-Shaam Oven is under temperature?
If your Alto-Shaam oven is not reaching the correct temperature, troubleshoot the heating element.
Why Alto-Shaam Oven shows high limit error?
A high limit error in your Alto-Shaam oven can occur due to several reasons: * Improperly installed jet plate(s). * The cavity fan is not working. * Optional grease filters are blocked with debris. * Heat relay(s) are stuck closed. * Faulty connection between the high limit switch and the control board. * A defective high limit switch.
What causes gas lockout in Alto-Shaam Oven?
A gas lockout in your Alto-Shaam oven is caused by a lack of fuel pressure.
Why Alto-Shaam Oven has bi-metal thermostat open?
An open bi-metal thermostat in your Alto-Shaam oven can be caused by: * Blocked or dirty cooling fan filters. * A cooling fan that is not operating. * A faulty connection between the bi-metal switch and the control board. * Installation without adequate clearance. * A defective bi-metal switch.
What causes gas combustion blower speed failure in Alto-Shaam Oven?
A gas combustion blower speed failure in your Alto-Shaam oven can occur if: * The power supply cable is not connected to the blower motor. * The speed control cable is not connected to the blower motor. * The blower motor is blocked, rotation is impeded, or the motor is faulty. * There is a faulty PWM daughter board.
What causes ignition module/valve failure in Alto-Shaam Oven?
Ignition module or valve failure in your Alto-Shaam oven happens when the valve status is not open after a call for heat.
What causes interface board - control board communication error in Alto-Shaam Oven?
An interface board to control board communication error in your Alto-Shaam oven can be caused by: * A connection issue with the modbus cable. * A faulty modbus cable. * A defective control board. * A malfunctioning interface board.
Brand | Alto-Shaam |
---|---|
Model | Vector VMC-H4H |
Category | Oven |
Language | English |