MAINTENANCE
Minimum maintenance should prevent unnecessary repairs. You will get years of dependable
operation if you follow the suggested maintenance schedule. Check the following:
Daily
Charge Batteries daily when the Amigo is used. Charge the Battery until fully charged to ensure
proper Battery operation. Extended charging is good for the Batteries and will not overcharge them.
Monthly
Check and clean Battery Terminals and the Wire Connections as needed with a
light piece of emery cloth or brush and soda water.
• Clean Upholstery, Plastic and Metal with a mild surface cleaner.
• Inspect Batteries for any cracks or damage of any kind.
• Check and tighten any exposed Fasteners.
KEEP CLEANING SOLVENTS AWAY FROM ELECTRICAL WIRES AND CONNECTIONS.
Six Months
• Check all Screws and Clips (that are holding wheels) for tightness and wear.
• Check all Electrical Connections for clean contact.
• Charging Connection should be inspected for tight Connection.
• Check Tires for wear.
• Inspect Seat Posts for wear.
• Lubricate Plastic Bearings on Upper Seat Post.
• Inspect inside the Battery Case, particularly at the bottom, for liquid.
• Inspect Front Drive Belt for wear, tighten if needed.
Yearly
• Have your Authorized Service Center check your Amigo completely.
• Grease Front Drive Chain.
• Lubricate Steering Column Bearings.
Battery Maintenance
VRLA (Valve Regulated Lead Acid) Deep Cycle Batteries are used for operating your Amigo. They are
maintenance-free and are transportable on aircraft, buses, trains, etc. as there is no danger of spillage.
By following the Charger and Battery procedures, you can expect extended battery life.
Fasteners Replacement
Use only Grade 8 (US) or 12.9 DIN (metric) in all applications. For service and
replacement parts, we recommend Amigo authorized parts.
Microprocessor Controller (MPC)
Do not attempt to service the MPC or related electronic components, as this will void the warranty.
11
To Next Page
Loading...
Need help?
General
