Amigo E-Line User Manual

6. Setting Display
After start-up, please hold both UP and DOWN at the same time, for 3 seconds, LCD will enter into the setting state.
Time Setting
After entering into the setting state, first set the HOUR by using UP and DOWN. Press MODE for confirmation and then set the MINUTE by using UP and DOWN. Press
MODE for confirmation and then set the top riding speed.
Top-speed Setting
The default figure of the top riding speed in the display is 25Km/h. You can change this figure and re-set a new top riding speed. If the e-bike speed exceeds this new
figure, the controller will limit the speed and return to the max speed to ensure the rider’s safety.
The setting range of top riding speed is from 10Km/h to 25Km/h. After setting the top riding speed, please press MODE for confirmation and enter into the display unit
setting.

Amigo E-Line Specifications

General

Brand	Amigo
Model	E-Line
Category	Scooter
Language	English