10. Maintenance
Make sure you carry out the following safety checks before riding you E-bike:
Brakes
• Check that the brakes are working properly.
• Visual inspection of the brake linings to check that they are not worn and that they are aligned to the wheels.
• Make sure that the handbrake cables are attached properly and that there is no evidence of wear.
Crank and pedals
• Check that the pedals and crank are seated correctly.
• Check that the crank arm is properly fitted to the axle.
Lubrication
The chain should always feel greasy when touching. Under normal weather conditions you only need to lubricate the chain after every 200-300 km of
ridding. However, in rainy conditions it may be necessary to lubricate more often.
Washing
You may wash your bicycle when needed but you should avoid spraying water directly on electrical parts such as battery, motor in front hub, speed sensor
in bottom bracket and display on handlebar.
To Next Page
Loading...
Need help?
General
