C139604000.fm
- 11 -
)4
'"
$%
&2
%3
%NGLISH
Important
When handling and installing the appliance
comply with the information provided by
the constructor directly on the packaging,
on the appliance and in the instructions for
use.
If necessary, the person authorised to carry
out these operations must organise a "safe-
ty plan" to protect the people directly in-
volved.
The packaging is designed to reduce space and as ap-
propriate to the type of transport used. To simplify
transport, some components may be removed and
suitably protected and packed for transport.
The packaging carries all information necessary for
loading and unloading. When unpacking, check that
all components are present in the correct quantities
and are undamaged.
The packaging material must be properly disposed of
in accordance with legal requirements.
Different means of transport may be used, depend-
ing partly on the destination.
The chart shows the most commonly used alterna-
tives.
During transport, fix the packaging to the means of
transport securely to prevent undesirable shifting.
The appliance can be handled using fork-lift or hook
equipment of suitable load-carrying capacity.
Before lifting, check the position of the load’s centre
of gravity.
Important
When engaging with the lifting equipment,
watch out for the intake and outlet pipes.
HANDLING AND INSTALLATION 7
RECOMMENDATIONS FOR HANDLING AND INSTALLATION
PACKAGING AND UNPACKING
TRANSPORT
HANDLING AND LIFTING
Lifting
equipment
Means of transport
IDM-3960200180.tif
IDM-3960330920.tif
IDM-39603604300.tif
To Next Page
Loading...
Need help?
General
