ANSI FRONTLINE RPA061S User Manual

24"
Manual Revision Code: FRONTLINE-SRL-04 10-19-20
2
in non-leading edge situan.
Connector:
Connectors must be compable in size, shape, and strength.
Self-closing, self-locking connectors are required by ANSI and OSHA.
-5000 lbs. (22.2 KN) for non-cered anchorages.
-Two  the maximum arrest force permied when cercan exists
Compability:
Connecng Component Limitaons:
A Competent Person must ensure the compability of all connecns and that of the system.
If any other component in the system doesn’t operate properly or if any connector doesn’t lock, don’t use
the system.
Don’t use if any part of the system appears to be damaged, or a body belt for fall arrest applicas.
All connector gates withstand minimum loads of 3,600 lbs.
Compable Connecns:
Incompable Connecs:
For Tie-Back
Models Only

ANSI FRONTLINE RPA061S Specifications

General

Brand	ANSI
Model	FRONTLINE RPA061S
Category	Safety Equipment
Language	English