ANSI FRONTLINE RPA061S User Manual

Manual Revision Code: FRONTLINE-SRL-04 10-19-20
3
INSPECTION FREQUENCY:
SRLs shall be inspected by the authorized person or rescuer before each use.
The inspechall be conducted by a competent person other than the user.
The competent person shall use the InspecSchedule and checking list for appropriate inspecn
intervals and procedures.
Results of the Competent person inspecn should be recorded in the " Inspec and Maintenance Log"
on the back pages of instrucn.
APPLICATIONS:
Purpose:
This product is part of a personal fall arrest, restraint, work posining, suspension, or rescue system.
A Personal Fall Arrest System (PFAS) is typically composed of an anchorage and a Full Body Harness (FBH),
with a connecng device, i.e., a Shock Absorbing Lanyard (SAL), or a Self-Retracng Device (SRL), aach to
the dorsal D-ring of the FBH.
SRLs are designed for use in applicans where falls may occur.
SRLs covered by this manual, SRLs may be used in many situans where a combinaof work mobility
and fall protecn is required. (i.e. inspecn work, general construcn, maintenance work, oil
producn, conned space work, etc.)
Standards:
SRLs crm to the naonal standard idened on the label. Refer to local, state, and federal
(OSHA)requirements governing occupaonal safety for addinal informan. The standard are ANSI
Z359.14-2014 - Safety Requirement for Self-Retracng Device for Personal Fall Arrest and Rescue Systems.
Free Fall:
When anchorage overhead, SRLs will limit the free fall distance to 2. (61cm), or less. To avoid increased
fall distances, anchor the SRL directly above the work level. Avoid working where your lifeline may cross or
tangle with that of another worker. Never clamp, knot, or prevent the lifeline from retracng or being taut.

ANSI FRONTLINE RPA061S Specifications

General

Brand	ANSI
Model	FRONTLINE RPA061S
Category	Safety Equipment
Language	English