AOC G2490VX User Manual

3. DP
4. Earphone
Connect to PC
1. Connect the power cord to the back of the display firmly.
2. Turn off your computer and unplug its power cable.
3. Connect the display signal cable to the video connector on the back of your computer.
4. Plug the power cord of your computer and your display into a nearby outlet.
5. Turn on your computer and display.
If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting.
To protect equipment, always turn off the PC and LCD monitor before connecting
Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure.
Follow these steps:
1. Remove the base.
2. Follow the manufacturer’s instructions to assemble the wall mounting arm.
3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor.
4. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on attaching it to the wall.
Noted: VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC
Adaptive-Sync function
1. Adaptive-Sync function is working with DP/HDMI
Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com
Radeon™ RX Vega series
Radeon™ RX 500 series
Radeon™ RX 400 series
Radeon™ R9/R7 300 series R9 370/X, R7 370/X, R7 265 except
Radeon™ Pro Duo (2016)
Radeon™ R9 Nano series
Radeon™ R9 Fury series
Radeon™ R9/R7 200 series (R9 270/X, R9 280/X except)
Adjusting
Hotkeys
1 Source/Exit
2 Dial Point
3 Game Mode
4 Image Ratio
5 Power/Menu/Enter
Power/Menu/Enter
Press the Power button to turn on the monitor.
When there is no OSD, Press to display the OSD or confirm the selection.
Dial Point
When there is no OSD, press Dial Point button to show / hide Dial Point.
Image ratio
When there is no OSD, Press > hotkey to active image ratio , Press < or > to adjust 4:3 or wide.
Game Mode
When there is no OSD, press ”Left” key to open game mode function, then press ”Left” or “Right” key to select game mode (FPS, RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) basing on
the different game types.

AOC G2490VX Specifications

General

Panel type	VA
Color gamut	87 %
Pixel pitch	0.2745 x 0.2745 mm
Screen shape	Flat
Display diagonal	23.8 \
Display technology	-
Native aspect ratio	16:9
sRGB coverage (typical)	126 %
Contrast ratio (typical)	3500:1
Display number of colors	1.67 billion colours
Display diagonal (metric)	60 cm
Display brightness (typical)	350 cd/m²
High Dynamic Range (HDR) supported	Yes
HDMI version	1.4
DisplayPort version	1.2
AMD FreeSync type	FreeSync Premium
Package type	Box
Input current	1.5 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	22 W
Tilt angle range	-5 - 23 °
Panel mounting interface	100 x 100 mm
Feet color	Black
Product color	Black, Red
Market positioning	Gaming

Weight and Dimensions

Depth (with stand)	199 mm
Height (with stand)	411 mm
Weight (with stand)	3540 g
Depth (without stand)	47 mm
Width (without stand)	541 mm
Height (without stand)	322 mm
Weight (without stand)	2880 g