18
use and maintenance
ETX 125
AUXILIARY EQUIPMENT
GLOVE/TOOL KIT COMPARTMENT
The glove/tool kit compartment is
positioned under the left side cover; to
reach it:
◆
Remove the left side cover, see p. 40
(REMOVING THE SIDE COVERS).
◆
Withdraw the compartment cover from
behind (1).
The tool kit (2) includes:
– n˚ 1 tool case
– n˚ 1 4 mm bent Allen spanner
– n˚ 1 5 mm bent Allen spanner
– n˚ 1 6 mm bent Allen spanner
– n˚ 1 8 mm bent Allen spanner
– n˚ 1 7x8mm double fork spanner
– n˚ 1 10x13 mm double fork spanner
– n˚ 1 19 mm fork spanner
– n˚ 1 21x24 mm double socket spanner
– n˚ 1 cross-/cut-headed screwdriver
– n˚ 1 screwdriver handle
– n˚ 1 3x70 mm cross-headed screwdriver
Max. allowed weight: 1.5 kg
CRASH HELMET HOOK
Thanks to the crash helmet hook, you no
longer have to carry the crash helmet with
you every time you park the vehicle.
Do not ride with the crash helmet
hanging from the hook, as this
may seriously compromise your
safety.
To hang the crash helmet, proceed as
follows:
◆
Insert the key in the lock (3).
◆
Rotate the key clockwise.
◆
Pass the crash helmet cable through the
hook (4).
◆
Rotate the key anticlockwise.
Make sure that you have correctly
closed the hook (4).
a
c
To Next Page
Need help?
General
