APRILIA ETX 125 - 1998 User Manual

64
use and maintenance ETX 125
CHANGING THE FRONT AND REAR
DIRECTION INDICATORS
Carefully read p. 61 (BULBS).
Before changing a bulb, check
the fuses, see p. 58 (CHANGING
THE FUSES).
◆
Unscrew and remove the screw (1).
Upon reassembly, tighten the
screw (1) carefully and
moderately, in order not to
damage the protection screen.
◆
Remove the protection screen (2).
◆
Press the bulb (3) slightly and rotate it
anticlockwise.
◆
Extract the bulb from its seat.
Insert the bulb in the bulb
socket, making the two pins co-
incide with the relevant guides on the
bulb socket.
◆
Correctly install a new bulb of the same
type.
CHANGING THE REAR LIGHT
BULB
Before changing a bulb, check
the fuses, see p. 58 (CHANGING
THE FUSES) and the efficiency of the
stoplight switches, see p. 60 (CHECK-
ING THE SWITCHES).
Carefully read p. 61 (BULBS).
◆
Unscrew and remove the two screws (4).
Upon reassembly, tighten the
two screws (4) carefully and
moderately, in order not to
damage the protection screen.
◆
Remove the protection screen (5).
◆
Press the bulb (6) slightly and rotate it
anticlockwise.
◆
Extract the bulb from its seat.
Insert the bulb in the bulb
socket, making the two pins
coincide with the relevant guides on
the bulb socket.
◆
Correctly install a new bulb of the same
type.
c
a
c
c
a
c

APRILIA ETX 125 - 1998 Specifications

General

Brand	APRILIA
Model	ETX 125 - 1998
Category	Motorcycle
Language	English