25
STANDARD SETTING
Keep the two outer push buttons pressed
for about 2 seconds to enable the STAN-
DARD SETTING programme.
This menu will allow you to modify the wheel diame-
ter, the time setting, the vehicle lubrication and main-
tenance interval, the total distance covered (ODO)
and the total race time (ART).
The metric system setting, KM/H to MPH or vice-ver-
sa, can be modified only from the START-UP SET-
TING menu.
Fig. 28
MODE
55
21
1
WS
CLOCK ODO ART WS
To Next Page
Need help?
General
