FOR MODELS: JGW, JGR AND JGJ SECTION 1 - DESIGN SPECIFICATIONS & DATA
1/01 PAGE 1 - 21
Ariel Bolting
Bolts have been selected that meet Ariel's strength, elongation, sealing and locking require-
ments. Proper bolting must be used and tightened to the values listed in Table 1-11 on page
1-15. Figure 1-13: is provided to assist in the identification of bolts used in an Ariel compres-
sor.
Connecting rod, valve cap and suction/discharge nozzle-Ariel supplied specialized compan-
ion flange-bolting is modified to prevent fatigue and cannot be replaced with standard bolts.
If attempting to replace other bolting with standard bolts and there is any question, contact
your packager or Ariel. Ariel supplied replacement bolting is recommended.
FIGURE 1-11: TORQUE WRENCH WITH ADAPTOR AT ANY ANGLE
FIGURE 1-12: TORQUE WRENCH WITH ADAPTOR AT RIGHT ANGLE
FORCE
FORCE
To Next Page
Loading...
Need help?
General
