Aritech 1X-F Series User Manual

1X-F Series Operation Manual 13
Control panel operation
User levels
For your safety, access to some features of this product are restricted by user
levels. The access privileges of each user level are described below.
Public user
The public user level is the default user level.
This level allows basic operational tasks to respond to fire alarms and/or faults at
the control panel. No password is required.
See “Public user level operation” on page 14 for more information.
Operator user
The operator user level allows additional operating tasks that command the
system or perform maintenance actions. It is reserved for authorized users who
have been trained to operate the control panel.
The default password for the operator/maintenance user is 2222.
See “Operator user level operation” on page 17 for more information.
This is a restricted user level protected by password security. To enter the
operator user level, enter the corresponding password using the numeric keypad,
and then press Enter.
A long beep and a steady Reset LED indicate that the correct password was
entered and that the operator user level is active. Three short beeps
accompanied by a flashing General Fault LED indicate that an incorrect
password was entered.
The control panel automatically exits the operator user level and reverts to the
public user level after 5 minutes if no button is pressed.
Note: The control panel is available with an access key option. The key switch is
located on the panel cover. With this option, either the key or the password can
be used to enter the operator user level.

Aritech 1X-F Series Specifications

General

Brand	Aritech
Model	1X-F Series
Category	Control Panel
Language	English